Installation
P_SI_0012_SW
Fig. 14: Direction of rotation of motor
Stroke sensor (Option)
Other units
28
CAUTION!
The motor may be damaged
The motor is not equipped with a fuse.
–
Install a suitable motor protection switch.
1.
Use a suitable cable between the motor terminal box and
power supply.
2.
Install an emergency cut-off switch or include the motor in the
emergency cut-off management of the system.
–
Key motor data can be found on the unit name‐
plate.
Motor data sheets can be requested for more infor‐
–
mation.
The terminal wiring diagram is located in the ter‐
–
minal box.
Notes on the speed controlled motor with external
–
fan and temperature monitoring can be found in
the "General operating instructions for ProMinent
motor-driven metering pumps and hydraulic acces‐
sories"!
The external fan requires an independent mains con‐
nection.
Connect the stroke sensor to a suitable monitoring device
according to the details in the chapter "Technical Data". Also
observe its technical data.
Install the other units according to their documentation.
®