Table of Contents
Advertisement
Interference with pacemakers
The functioning of cardiac pacemakers could be impaired by electromagnetic fields. Death or
serious physical injury can result.
● It is therefore not permissible for people with pacemakers to stand close to the device.
Data loss
Electromagnetic fields can cause data loss to magnetic or electronic data storage media.
● Therefore, do not carry magnetic or electronic data storage media with you.
Persons responsible for plants and systems can find additional information on electromagnetic
fields under "Information for persons responsible for plants and systems (Page 22)."
2.6
Components that can be destroyed by electrostatic discharge (ESD)
ESD guidelines
Material damage caused by electrostatic discharge.
Electronic components can be destroyed in the event of improper handling, transport, storage,
and shipping.
Pack the electronic components in appropriate ESD packaging; e.g. ESD foam, ESD
packaging bags and ESD transport containers.
To protect your equipment against damage, follow the instructions given below.
● Avoid physical contact with electronic components. If it is essential that you perform work on
● Do not place electronic components close to data terminals, monitors or televisions.
● Electronic components should not be brought into contact with electrically insulating
● Bring components into contact only with ESD-compliant materials, e.g. ESD tables, ESD
● Only carry out measurements on the components if one of the following conditions is met:
SINAMICS GM150 6SL3810-2LN31-8AA2
Operating Instructions Rev.201910281332 EXAMPLE
2.6 Components that can be destroyed by electrostatic discharge (ESD)
these components, you must wear one of the following pieces of protective gear:
– Grounded ESD wrist strap
– ESD shoes or ESD shoe grounding strips if there is also an ESD floor.
Maintain a minimum clearance to the screen (> 10 cm).
materials such as plastic foil, plastic parts, insulating table supports or clothing made of
synthetic fibers.
surfaces, ESD packaging.
– The measuring device is grounded with a protective conductor, for example.
– The measuring head of a floating measuring device has been discharged directly before
the measurement.
The necessary ESD protective measures for the entire working range for electrostatically
sensitive devices are illustrated once again in the following drawings.
Precise instructions for ESD protective measures are specified in the standard
DIN EN 61340‑5‑1.
Safety instructions
21
Advertisement
Table of Contents
