Chapter 3 Installation
Upon receipt
Upon receipt
Unpack the device
Specially designed packing material protects the Device during shipping. Avoid damaging
the shipping container and packing material when unpacking the Device; if necessary the
shipping container and packing material can be reused to ship the Device.
CAUTION
This Device is ESD sensitive and should only be unpacked by qualified personnel.
Mise en Garde
Cet appareil est sensible aux DES et il doit seulement être déballé par un personnel
qualifié.
How to Unpack the Module
1
Cut and remove sealing tape on top of shipping container.
2
Open shipping container. Remove foam insert and Module from shipping container.
3
Remove Module from between foam inserts.
4
Remove Module from ESD protective packaging.
5
Store packing material and shipping container for possible future use.
NOTE
Refer to Packing Procedure for information and instructions for shipping the module.
Verify contents
Verify shipment is complete. Report any discrepancies to Viavi Customer Service.
Final
Page 10
mA-3011 AXIe Embedded Host Module Operation Guide
March 2019