Table of Contents
Advertisement
Chapter 3 Installation
Configure network connections
Setup module as host controller
To configure the mA-3011 as a Host Controller:
How to Setup as Host Controller
1
Complete Module Installation Procedure.
2
Complete Chassis installation (refer to Chassis user documentation).
3
Complete the mA-3011 Self Test Procedure.
4
Connect an external monitor to the mA-3011DisplayPort Connector.
5
Connect a USB Keyboard and USB Mouse to the mA-3011 USB Connectors.
Figure 7
6
Power on external monitor.
7
Power on Chassis. Wait while the Module's operating system is initiated.
8
When the system is ready for use, the monitor updates to display the Host Module's
operating system. The contents and appearance of the Host Module's Operating
System varies depending on the software that has been installed on the module as
well as the user settings. The image below shows an example of how the Host
Module Operating System may appear.
Final
Page 14
mA-3011 and Chassis Connection Diagram
mA-3011 AXIe Embedded Host Module Operation Guide
March 2019
Advertisement
Table of Contents
