Freight Costs; Packing Procedure - Viavi mA-3011 Operation Manual

Freight Costs

All freight costs on non-warranty shipments are assumed by the customer. Viavi
recommends that customers obtain freight insurance with the freight carrier when shipping
the Device. Viavi is not responsible for cost of repairs for damages that occur during
shipment on warranty or non-warranty items.

Packing Procedure

CAUTION
This Device is ESD sensitive and should only be unpacked by qualified personnel.
Mise en Garde
Cet appareil est sensible aux DES et il doit seulement être déballé par un personnel
qualifié.
How to package the mA-3011 for shipping
Contact Customer Service to obtain a Return Authorization number, return address and for
questions about proper packaging.
1 Cut and remove sealing tape on top of shipping container.
2 Open shipping container. Remove foam insert and Module from shipping container.
3 Remove Module from between foam inserts.
4 Remove Module from ESD protective packaging.
5 Store packing material and shipping container for possible future use.
NOTE
Refer to Packing Procedure for information and instructions for shipping the Module.
Final
March 2019
mA-3011 AXIe Embedded Host Module Operation Guide
Chapter 5 Care and Maintenance
Shipping the mA-3011
Page 29