1. Press and hold eFOLD for two to three seconds to fold the treadmill. During this process an acusti-
cal signal will be heard all two to three seconds. This signal will stop once the treadmill is folded up
completely.
2. Press and hold eFOLD for two to three seconds again to fold the treadmill down again. During
this process an acustical signal will be heard all two to three seconds. This signal will stop once the
treadmill is folded down completely.
NOTE:
- eFOLD kann only be used when the treadmill is in standby mode. The motor must not be running.
- During this process an acustical signal will be heard all two to three seconds. This signal will stop
once the treadmill has reached its end position.
- In case there is a power failure while the treadmill is being folded, please restart the treadmill and
start the eFOLD function again.
- If there is an emergency, please press the STOP button or remove the safety key to stop the eFOLD
function immediately.
1. Make sure that there is enough space around the treadmill.
2. The minimum safety distance around the treadmill should be 1m.
TX40e
20
Need help?
Do you have a question about the TX40e and is the answer not in the manual?