Chapter 3 Service Procedures; Introduction; Placing The 9348 In The Service Position - IBM 9348 Service Information

Chapter 3. Service Procedures
Introduction
Unless otherwise stated, a 1 t illustrations that show the rack mounted unit also apply
to the table top unit.
The following special tools are needed to service the tape unit.
Handle PN 1650840
Four-inch extension PN 6431952
Kit (7 TORX** bits) PN 39F8407
Placing the 9348 in the Service Position
Set the Power switch on the
control panel to the Off position.
@
Copyright IBM Corp. 1989, 1992
3-1