Table of Contents
Advertisement
Remove the seven connectors
from the motorlpower card.
Note: Record the position of the
two cables that connect to connec-
tors J6 and J7 on the motorlpower
card before removing them. Label
the cables if they are not already
labeled.
The cable with the blue and white
wires comes from the dc power
switch on the front panel and goes
to connector J6. The cable with
two brown wires comes from the
secondary winding of the trans-
former and goes to connector 57.
~ o t o r j ~ o w e r
Card
Connectors
R H3 B078-0
Chapter 3. Service Procedures
3-43
Advertisement
Table of Contents
