IBM 9348 Service Information page 85

Note: If you are working on a
table-top unit go to step 5.
Slide the tape unit back into the
rack.
Slide the tape unit back into the
rack:
Press the lock pushbutton on
the slide (on each side of the
tape unit), and carefully push
the tape unit over the lock
pushbuttons.
If the 9348 stops before it is
completely in the rack, press
the lock pushbutton again and
push the unit into the rack until
it fastens in place.
CAUIION:
Ensum that your fingers are not
between the front cover and the
rack when you push the unit into
the rack.
( R S F T C O ~ ~ )
Chapter 3. Service Procedures
3-23