IBM 9348 Service Information page 277

power cable, safety i,nspection 5-9
power-on self-test B-1
preface v
procedure, cleaning 4-3
processor communication tests, 50- 59 B-8
program module installation 3-29
program module removal 3-29
R
readlwrite card installation 3-20
read/write card removal 3-15
reference code table 1-3
references, safety information 5-2
related manuals vi
removal
ac power module 3-1 1 9
battery 3-15
blower motor 3-90
BOTIEOT sensor 3-59
buffer card 3-1 5
card 3-15
cleaner block 3-67
connector board 3-26
control panel card 3-30
controller card 3-15
cooling fan 3-1 14
door' interlock microswitch 3-30
door solenoid 3-30
enclosure 3-1 23
front panel assembly 3-30
fuse 3-110
head plate assembly 3-67
hub lock solenoid 3-97
hub release lever 3-97
interface card 3-1 01
motor/power card 3-42
program module 3-29
readlwri te card 3-1 5
sensor 3-48
sensor card
3-48
speed encoder 3-52, 3-67
supply hub 3-78
supply motor 3-78
take-up hub 3-78
take-up motor 3-78
tape lifter 3-56, 3-67
tension arm 3-59
running diagnostic tests A-5
S
safety
chemical 5-1
conditions 5-1
education 5-1
front door 5 2
front panel 5-2
safety (continued)
fuse 5-2
grounds 5-8
labels 5 7
pivot locking screws 5-5
reference information 5 2
slide stopping screws 5 3
top cover 5-2
safety education course, electrical 5-1
safety inspection
covers 5 2
fuse 5-2
guide 5 1
pivot locking screws 5 5
power cable 5-9
safety grounds 5-8
safety labels 5-7
slide stopping screws 5 3
safety notices
caution notices iii
danger notices iii
warning notices iv
sensor card installation 3-50
sensor card removal 3-48
sensor installation 3-50
sensor removal 3-48
sequence tests B-1
service position, placing the tape unit i n 3-1
service representative buttons, description A-2
slide stopping screws, safety inspection 5-3
solvents, use of
5-1
speed encoder instal lation 3-54,3-73
speed encoder removal 3-52,3-67
starting the service call 1-1
status codes 1-32
status, description A-3
supply hub installation 3-85
supply hub removal 3-78
supply motor installation 3-85
supply motor removal 3-78
T
take-up hub installation 3-85
take-up hub removal 3-78
take-up motor installation 3-85
take-up motor removal 3-78
tape lifter installation 3-57, 3-73
tape lifter removal 3-56,3-67
tape unit operational tests B-16
tension arm installation 3-63
tension arm removal 3-59
TEST option A-4
u
user-defined sequence tests B-6