Table of Contents
Advertisement
Warning: Exchange the fuse with
one with the same rating.
The 6.0 ampere fuse must be on
the side of the module nearest to
the 120 V triangle and the 3.15
ampere fuse must be on the side
nearest to the 240 V triangle.
Ensure that the white arrow on the
fuse module lines up with the
desired voltage rating printed on
the fuse module receptacle.
Slide the fuse module into its
receptacle.
Connect the power cable to the
rear of the tape unit.
3-1 12
9348
Service Information
Advertisement
Table of Contents
