Connecting the Shunt
1)Remove the Buffer Pass Unit the screw
Cale
x1
Connecting the Wire saddle
1) Attach the bundled wire saddle to the rear lower cover.
6
Installation > Installation Procedure > Connecting the Wire saddle
2)Attach the undled shunt cale at the rear ottom of the Connection Machine
and the connected equipment using the Bundled binding-head screw(M4x10)
and step 1) to the supplied screw.
F-6-27
F-6-27
2) Stow the excess length of the interface cable connected to the
downstream finisher into the wire saddle.
F-6-29
F-6-29
6
Installation > Installation Procedure > Connecting the Wire saddle
x2
F-6-28
F-6-28
F-6-30
F-6-30
6-14
6-14