Removing The Motor; Removing The Tray Pickup Motor (M1) - Canon K1 Service Manual

4
Parts Replacement/Cleaning Procedure > Removing the Motor > Removing the Tray Pickup Motor (M1)

Removing the Motor

Removing the Tray Pickup Motor (M1)

2) Remove one connector and two wire saddles to remove the harness
1) Remove the rear cover.
(Refer to:4-9)
from the harness guide.
x1
x2
3) Remove four screws, one belt, and one spring to remove the tray pickup
motor unit.
x4
4
Parts Replacement/Cleaning Procedure > Removing the Motor > Removing the Tray Pickup Motor (M1)
F-4-46 F-4-46
4) Remove two screws and one connector to remove the tray pickup
motor.
x1
x2
F-4-47 F-4-47
F-4-48 F-4-48
4-21
4-21