Connecting To Connection Machine - Canon K1 Service Manual

Connecting to Connection Machine

1) Stow the left overturning prevention stay by removing a wing screw and lifting the stay up.
CAUTION
C h e c k t h a t
t h e c o n n e c t e d
e q u i p m e n t i s
switched off and
unplugged from
the wall outlet.
3) Stow the right overturning prevention stay by removing a wing screw and then clamp it with the wing screw removed.
6
Installation > Installation Procedure > Connecting to Connection Machine
x1
6
Installation > Installation Procedure > Connecting to Connection Machine
2) After stowing the overturning prevention stay, clamp it with the wing screw
removed.
x1
F-6-8 F-6-8
4) Install the inserter in position y inserting the positioning pin into the hole
on the inserter.
F-6-10 F-6-10
6-8
F-6-9 F-6-9
F-6-11 F-6-11
6-8