Removing The Sensor; Removing The Upper Tray Empty Sensor (S9) - Canon K1 Service Manual

4
Parts Replacement/Cleaning Procedure > Removing the Sensor > Removing the Upper tray empty sensor (S9)

Removing the Sensor

Removing the Upper tray empty sensor (S9)

5) Remove one screw to remove the sensor cover.
1) Remove the rear cover.
(Refer to:4-9)
2) Increase the top cover open/close
angle.
(Refer to:4-9)
3) Remove the front cover.
(Refer to:4-10)
4) Remove the upper tray unit.
(Refer to:4-12)
4
Parts Replacement/Cleaning Procedure > Removing the Sensor > Removing the Upper tray empty sensor (S9)
x1
F-4-62 F-4-62
6) Remove one connector to remove the upper tray empty sensor.
x1
4-27
F-4-63 F-4-63
4-27