4
Parts Replacement/Cleaning Procedure > Removing the Main Unit > Removing the Inserter Pickup Unit
Removing the Lower Tray Unit
5) Remove four screws and one connector to remove the lower tray unit.
1) Remove the rear cover.
(Refer to:4-9)
2) Increase the top cover open/
close angle.
(Refer to:4-9)
3) Remove the front cover.
(Refer to:4-10)
4) Remove the upper tray unit.
(Refer to:4-12)
Removing the Inserter Pickup Unit
3) Remove two screws, one clamp, and 11 connectors to remove the interface cable.
1) Remove the inserter rear cover.
(Refer to:4-9)
2) Increase the inserter open
angle.
(Refer to:4-11)
4
Parts Replacement/Cleaning Procedure > Removing the Main Unit > Removing the Inserter Pickup Unit
x2
x2
x11
F-4-24
F-4-24
4-13
x2
F-4-23
F-4-23
4-13