4
Parts Replacement/Cleaning Procedure > Removing the Sensor > Removing the Low tray last paper sensor 2 (S15)
8) Remove two screws to remove the tray lower cover (small).
x2
Removing the Low tray last paper sensor 2 (S15)
6) Remove four screws to remove the tray lower cover (large).
1) Remove the rear cover.
(Refer to:4-9)
2) Increase the top cover
open/close angle.
(Refer to:4-9)
3) Remove the front cover.
(Refer to:4-10)
4) Remove the upper tray unit.
(Refer to:4-12)
5) Remove the lower tray unit.
(Refer to:4-12)
4
Parts Replacement/Cleaning Procedure > Removing the Sensor > Removing the Low tray last paper sensor 2 (S15)
9) Remove one connector to remove the low tray last paper
sensor1.
F-4-77
F-4-77
x4
F-4-79
F-4-79
x1
F-4-78
F-4-78
7) Remove four screws to remove the tray lower cover (inner).
x4
4-32
F-4-80
F-4-80
4-32