Removing The Inserter Rear Cover; Changing The Inserter Top Cover Open/Close Angle - Canon K1 Service Manual

4
Parts Replacement/Cleaning Procedure > External/Innernal Covers > Changing the Inserter Top Cover Open/Close Angle

Removing the Inserter Rear Cover

1) Remove two screws to remove the inserter rear cover.

Changing the Inserter Top Cover Open/Close Angle

2) Remove one screw, remove the inserter top cover angle regulating shaft, and then open the top cover.
1) Remove the rear cover.
(Refer to:4-9)
4
Parts Replacement/Cleaning Procedure > External/Innernal Covers > Changing the Inserter Top Cover Open/Close Angle
F-4-15 F-4-15
x1
F-4-16 F-4-16
4-9
4-9