Removing The Inserter Electromagnetic Clutch (Lower) - Canon K1 Service Manual

4
Parts Replacement/Cleaning Procedure > Consumable Parts Requiring Periodic Replacement and Cleaning Points > Removing the Inserter electromagnetic clutch (lower)

Removing the Inserter electromagnetic clutch (lower)

4) Remove one screw and one connector, and the remove the
1) Remove the rear cover.
(Refer to:4-9) inserter electromagnetic clutch (lower)
2) Increase the top cover open/
close angle.
(Refer to:4-9)
3) Increase the middle guide open/
close angle.
(Refer to:4-10)
4 Parts Replacement/Cleaning Procedure > Consumable Parts Requiring Periodic Replacement and Cleaning Points > Removing the Inserter electromagnetic clutch (lower)
.
x1
x1
F-4-45 F-4-45
4-20
4-20