Removing The Low Tray Width Sensor (S13) - Canon K1 Service Manual

4
Parts Replacement/Cleaning Procedure > Removing the Sensor > Removing the Low tray width sensor (S13)
8) Remove one screw to remove the sensor cover.
x1

Removing the Low tray width sensor (S13)

6) Remove four screws to remove the tray lower cover (large).
1) Remove the rear cover.
(Refer to:4-9)
2) Increase the top cover
open/close angle.
(Refer to:4-9)
3) Remove the front cover.
(Refer to:4-10)
4) Remove the upper tray unit.
(Refer to:4-12)
5) Remove the lower tray unit.
(Refer to:4-12)
4 Parts Replacement/Cleaning Procedure > Removing the Sensor > Removing the Low tray width sensor (S13)
9) Remove one connector to remove the Low tray empty sensor
x1
F-4-69 F-4-69
x4
F-4-71 F-4-71
F-4-70 F-4-70
7) Remove four screws to remove the tray lower cover (inner).
x4
4-30
F-4-72 F-4-72
4-30