Drive Configuration; Basic Movement Outline - Canon K1 Service Manual

2
Technology > Basic Configuration > Basic movement outline > Surface insert operation

Drive Configuration

M3 M2
M6
M1 Tray Paper feed motor
M2 Upper tray lift motor
M3 Low tray lift motor
M4 Drive switchover motor
M5 Entrance motor 1
M6 Reverse motor
CL1 Uppper tray regist clutch
CL2 Low tray regist clutch
SOL1 Reverse solenoid
2 Technology > Basic Configuration > Basic movement outline > Surface insert operation
M1 M4
Drive switchover gear
CL1 CL2
SOL1
M5
F-2-4 F-2-4

Basic movement outline

■
Surface insert operation
Transfers the paper loaded in the inserter tray to the downstream equipment so the upper surface
of the paper will face up.
*Paper is fed from atray via a reversing pass to the straight pass.
2-4
F-2-5 F-2-5
2-4