Canon K1 Service Manual page 23

2
Technology > Various Modes of Control > Outline of operations > Sequence of surface insert operation
(7) Second paper feeding to standy position
- The reverse motor turns in the reverse direction at a speed of 800 mm/s to start feeding the paper
to the standy position.
- The reverse motor stops when the paper has been fed 51.2 mm since the reverse timing sensor
turned on.
M6
M6
(8) Second paper feeding to horizontal feed lock
- When an Entry signal for the second paper is received, the time specified to allocate a the pace
between the first and second papers is taken, the entrance motor 1 turns in the reverse direction
at the same speed as that of the motor in the host machine, and the reverse motor turns in the
reverse direction at the same speed as that of the motor in the host machine, thus feeding the
paper to the horizontal feed lock.
- An Eject signal is sent when the paper has been fed 12.3 mm since the delivery sensor 2 turned on.
2
Technology > Various Modes of Control > Outline of operations > Sequence of surface insert operation
F-2-18 F-2-18
S16
F-2-19 F-2-19
S16
M6
S21
M5
F-2-20 F-2-20
S21
M5
F-2-21 F-2-21
2-9
2-9