3)Return the wrench to the front upper cover.
F-6-23
F-6-23
Connecting the Cales
Connecting the
1)Connect the installed interface cable to the finisher with two bundled RS
Interface cale
tight screws(M4x8).(Refer to the Staple Finisher-A1/Booklet Finisher-A1
Installation Procedure)
6
Installation > Installation Procedure > Connecting the Cales
4)Return the jam recovery map and close the front upper
cover.
F-6-25
F-6-25
6
Installation > Installation Procedure > Connecting the Cales
F-6-24
F-6-24
Connecting the
Power Cord
1)Insert the bundled power cord into the inserter to connect.Insert
the plug end of the power cord into an external power outlet.
6-13
F-6-26
F-6-26
6-13