2
Technology > Basic Configuration > Overview of Electrical Circuitry
Basic Configuration
Functional Configuration
The components of this fold unit are organized into three major blocks: tray unit,Paper feed
unit and Feed unit.
1.tray unit
2
Technology > Basic Configuration > Overview of Electrical Circuitry
The machine's sequence of operations is controlled by the DC controller PCB.
The DC controller PCB is a CPU used to interpret input signals from sensors and host machine and
generate signals to drive such loads as motors and clutches at such times as programmed in
advance.
2.Paper feed unit
3.Feed unit
F-2-1
F-2-1
Overview of Electrical Circuitry
DC controller PCB
Fin-AG1/AG2
or
Arcnet PCB
Arcnet Connection
machin
2-2
motor
solenoid
CPU
sensor
F-2-2
F-2-2
2-2