Removing The Drive Switchover Motor (M4) - Canon K1 Service Manual

4
Parts Replacement/Cleaning Procedure > Removing the Motor > Removing the Drive Switchover Motor (M4)

Removing the Drive Switchover Motor (M4)

2) Remove four connectors and two clamps.
1) Remove the rear
cover.
(Refer to:4-9)
4) Remove three screws to remove the drive switchover motor unit.
x3
4 Parts Replacement/Cleaning Procedure > Removing the Motor > Removing the Drive Switchover Motor (M4)
F-4-49 F-4-49
5) Remove two screws to remove the drive switchover motor.
F-4-51 F-4-51
2) Loosen one screw to remove the harness guide.
x1
F-4-52 F-4-52
4-22
F-4-50 F-4-50
4-22