Table of Contents
Advertisement
Height/Inclination Checks
Height Check
1) Check to see if there is a height difference of 22±3mm between the right upper surface of the inserter and the left upper surface of the connected equipment.
MEMO
An improperly adjusted
height or inclination
could result in jams
frequently occurring at the
paper folding unit inlet.
Inclination Check
1) Check that the difference of clearances at the two positions as shown in the figure. The difference should be within 0±2mm.
6
Installation > Installation Procedure > Height/Inclination Checks
6
Installation > Installation Procedure > Height/Inclination Checks
F-6-14
F-6-14
F-6-15
F-6-15
6-10
6-10
Advertisement
Table of Contents
