Application Key - gefran ADV200 Instruction Manual

2.1 Application key

This application must be registered.
Register by entering a code supplied by Gefran.
Enter the code as follows:
• Connect to the drive using the GF_eXpress configurator or read the parameter indicated in the next point
using the keypad.
• Write down the Serial Number indicated in Regulation S/N (PAR 12106, ROLL FORMING FS \ About
menu).
• Contact Gefran support and provide the serial number you just read to obtain the application unlock
key.
Enter the unlock code in the Application key parameter field (PAR 572, CONFIG DRIVE menu).
•
Flying Shear for Roll Forming machines – Instruction manual Pag. 7 / 29