F-Range L-850C Light Fixture: Required Equipment; Specifications; Lamp; Isolation Transformers - ADB F-Range L-850C Manual

F-Range Type L-850C Style 3 Inset Lights
6. F-Range L-850C Light
Fixture: Required
Equipment

7. Specifications

Lamp

Isolation Transformers

Lamps
105 W unidirectional
105 W unidirectional
105 W bidirectional
(nonswitchable fixture)
105 W bidirectional
(switchable fixture)
 2006 ADB Airfield Solutions, Incorporated
All rights reserved
Refer to Table 2-1 for required equipment that is supplied. Refer to
Table 2-2 for required equipment that is not supplied. Refer to the
Parts section for part numbers.

Table 2-1 Required Equipment Supplied

F-Range L-850C inset light, with lamps
Instruction manual

Table 2-2 Required Equipment Not Supplied

Torque wrench (0 to 200 in-lb) (022.6 Nt-M)
Alignment jig
Diamond-faced core drill, 13 in. (330 mm diameter)
Diamond-faced saw, 3/8 in. (9.525 mm) thick
Crimping tool
Small water suction pump
L-830 isolation transformer
Eyebolt, 3/8 in. (9.525 mm) diameter
Lifting rod, 16 in. (406 mm) long
Set of fiber brushes
Set of socket wrenches, 1/2 in. (12.7 mm) drive
Set of screwdrivers, one with 3/8 in. (9.525 mm)
minimum blade width
Silicone grease
Joint sealing filler
This subsection provides specifications for the F-Range L-850C inset
light fixtures.
105 W/6.6 A, MR16 lamp
Refer to Table 2-3.

Table 2-3 Required Isolation Transformers

Series Circuit
Transformer
6.6 A One L-830-4
20 A One L-830-5
6.6 A
20 A
96A0285D
Issued 04/13
Description
Description
Isolation Watts
100
100
One L-830 200
Two L-830s 100
Description
Quantity
1
1 per order
Quantity
1
1
1
1
1
1
1 or 2
2
1
1
1
1
As required
As required
Amperes Hz
6.6/6.6 60
20/6.6 60
6.6/6.6 60
20/6.6 60
Page 2-8