Replacing Prism; Table 6-3 Parts List For Replacing Prism - ADB F-Range L-850C Manual

F-Range Type L-850C Style 3 Inset Lights

5. Replacing Prism

Item Part Number
B1 4071.62.630
B2 4071.50.030
B3 63A0993-3
B4 63A0986
B5 4071.50.052
B6 4017.50.360
B7 64A0925-10
B8 64A0936-13
NOTE A: Quantity is 1 for unidirectional, 2 for bidirectional.
NOTE B: Quantity is 2 for unidirectional, 4 for bidirectional.
 2006 ADB Airfield Solutions, Incorporated
All rights reserved
Replace the prism if it is broken or its surface is badly pitted or
scarred.
Refer to Table 6-3 for parts referred to in Figure 6-11.

Table 6-3 Parts List for Replacing Prism

Description
Inner cover
Sock seal
Prism
Flat seal
Prism-keeper plate
Prism clamp
Screw, M5 x 10 (for top cover assembly)
Screw, M5 x 13 (for top cover assembly)
To replace the prism, perform the following procedure:
1. See Figure 6-11. Remove the prism-clamp plate (B6) secured in
the cover.
Figure 6-11 Replacing Prism
96A0285D
Issued 04/13
Repair
Quantity Note
1
See note. A
See note. A
See note. A
See note. A
See note. A
See note. B
See note. B
Page 6-12