Safety; Section 1 Safety; Introduction; Safety Symbols - ADB F-Range L-850C Manual

F-Range Type L-850C Style 3 Inset Lights
Section 1

Safety

1. Introduction

2. Safety Symbols

 2006 ADB Airfield Solutions, Incorporated
All rights reserved
This section contains general safety instructions for using your ADB
Airfield Solutions equipment. Some safety instructions may not apply
to the equipment in this manual. Task- and equipment-specific
warnings are included in other sections of this manual where
appropriate. Note all warnings and follow all instructions carefully.
Failure to do so may result in personal injury, death, or property
damage.
To use this equipment safely,

refer to the FAA Advisory Circular AC 150/5340-26, Maintenance
of Airport Visual Aids Facilities, for instructions on safety
precautions.

observe all safety regulations. To avoid injuries, always remove
power prior to making any wire connections and touching any
parts. Refer to FAA Advisory Circular AC 150/5340-26.
 read and become familiar with the general safety instructions
provided in this section of the manual before installing,
operating, maintaining, or repairing this equipment.
 read and carefully follow the instructions given throughout this
manual for performing specific tasks and working with specific
equipment.
 store this manual within easy reach of personnel installing,
operating, maintaining, or repairing this equipment.

follow all applicable safety procedures required by your company,
industry standards, and government or other regulatory
agencies.
 obtain and read Material Safety Data Sheets (MSDS) for all
materials used.
Become familiar with the safety symbols presented in this section.
These symbols will alert you to safety hazards and conditions that
may result in personal injury, death, or property and equipment
damage.
WARNING: Failure to observe this warning may result in
personal injury, death, or equipment damage.
96A0285D
Issued 0413
Safety
Page 1-1