Figure 6-9 Disconnecting Lamp Wiring From Terminals - ADB F-Range L-850C Manual

Style 3 inset lights

Table of Contents

F-Range Type L-850C Style 3 Inset Lights

4. Replacing Film Disc

Cutout Assembly

(contd.)

Figure 6-9 Disconnecting Lamp Wiring from Terminals

 2006 ADB Airfield Solutions, Incorporated

To replace the film disc cutout assembly, perform the following

procedure:

1. Open the optical unit. Refer to Opening Optical Unit in this

section.

2. See Figure 6-9. Disconnect the lamp from the terminals on the

terminal block.

3. See Figure 6-4. Grasp the optical unit (1) and pull straight up

from the inner pan assembly (2).

96A0285D

Issued 04/13

Repair

Page 6-10

Table of Contents