Testing For Leaks; Figure 4-2 Pressure Release Screw; Figure 4-3 Pressure Test Fitting Assembly - ADB F-Range L-850C Manual

F-Range Type L-850C Style 3 Inset Lights

Testing for Leaks

1

Figure 4-3 Pressure Test Fitting Assembly

1. Pressure Test Fitting
2. Lock Hose Plug Sleeve
 2006 ADB Airfield Solutions, Incorporated
All rights reserved
To test for leaks, perform the following procedure:
1. See Figure 4-2. Remove pressure release screw (E11).

Figure 4-2 Pressure Release Screw

2. See Figure 4-3. Screw pressure test fitting (1) into the pressure
release port (the opening created when the pressure release
screw is removed). Screw fitting hand-tight.
2
96A0285D
Issued 04/13
Maintenance
Page 4-5