ADB F-Range L-850C Manual page 37

F-Range Type L-850C Style 3 Inset Lights
3. Replacing Lamp and
Filter
(contd.)
Item Part Number
Item 6 on
Figure 6-5
44A6112-1
44A6112-2
Item 7 on 6111.87.140
Figure 6-5
Item 8 on 1411.22.001
Figure 6-8
Item 8 on 1411.22.002
Figure 6-6
Item 9 on 2990.40.900
Figures 6-7/6-8
Item 10 on 4071.50.160
Figures 6-7/6-8
Item 11 on 63A0964
Figures 6-7/6-8
Item 12 on 4071.58.510
Figures 6-7/6-8
NOTE A: Quantity is 1 for unidirectional, 2 for bidirectional.
NOTE B: Quantity is 2 for unidirectional, 4 for bidirectional.
NOTE C: Quantity is 1 for clear/yellow lens, 0 for clear/clear lens.
 2006 ADB Airfield Solutions, Incorporated
All rights reserved
Table 6-1 Parts List for Replacing Lamp and Filter
Description
Terminal block assembly
Terminal block assembly, without film disc cutout
Terminal block assembly, with film disc cutout
Fast-on connector
Lamp and filter holder assembly – New Style used on
fixtures purchased after 9/20/05
Lamp and filter holder assembly – Old Style used on
fixtures purchased before 9/20/05
Lamp, 105 W
Filter spring
Filter, yellow
Retainer spring
To replace the lamp and filter, perform the following procedure:
1. Open the optical unit. Refer to Opening Optical Unit in this
section.
96A0285D
Issued 04/13
Repair
Quantity Note
See note. A
See note. B
See note. A
See note. A
See note. A
See note. C
See note. A
Page 6-4