Installation - ADB F-Range L-850C Manual

F-Range Type L-850C Style 3 Inset Lights
4. Intended Use
(contd.)

5. Installation

 2006 ADB Airfield Solutions, Incorporated
All rights reserved

using materials or auxiliary equipment that are inappropriate or
incompatible with your ADB Airfield Solutions equipment

allowing unqualified personnel to perform any task
Read the installation section of all system component manuals before
installing your equipment. A thorough understanding of system
components and their requirements will help you install the system
safely and efficiently.
WARNING: Failure to follow these safety procedures can
result in personal injury or death.

Allow only qualified personnel to install ADB Airfield Solutions
and auxiliary equipment. Use only approved equipment. Using
unapproved equipment in an approved system may void agency
approvals.
 Make sure all equipment is rated and approved for the
environment in which you are using it.

Follow all instructions for installing components and accessories.
 Install all electrical connections to local code.

Use only electrical wire of sufficient gauge and insulation to
handle the rated current demand. All wiring must meet local
codes.

Route electrical wiring along a protected path. Make sure they
will not be damaged by moving equipment.

Protect components from damage, wear, and harsh environment
conditions.
 Allow ample room for maintenance, panel accessibility, and cover
removal.

Protect equipment with safety devices as specified by applicable
safety regulations.

If safety devices must be removed for installation, install them
immediately after the work is completed and check them for
proper functioning.
96A0285D
Issued 0413
Safety
Page 1-3