Figure 6-8 New Lamp And Filter Holder - ADB F-Range L-850C Manual

F-Range Type L-850C Style 3 Inset Lights
3. Replacing Lamp and
Filter
(contd.)

Figure 6-8 New Lamp and Filter Holder

 2006 ADB Airfield Solutions, Incorporated
All rights reserved
-OR-
If replacing the filter for L-850C inset lights purchased after
September 20, 2006, perform the following procedure:
a. See Figure 6-8. Unlatch the retainer spring (12).
12
11
b. While holding onto the lamp (9) and filter holder
assembly (8), pull the lamp straight up.
c. Remove the filter spring (10) and filter (11).
d. Replace with new lamp and new filter.
NOTE: See Figure 6-7. To optimize photometric output,
make sure that the lamp is correctly positioned with the
arrow pointing up.
Issued 04/13
8
Never touch the bulb of the lamp with your bare hands. It
will reduce the lifetime of the lamp considerably. Should it
happen, clean the bulb with alcohol.
96A0285D
Repair
10
9
Page 6-8