Table of Contents
Advertisement
L860 Elevated Low-Intensity Edge Light
4. Intended Use
(contd.)
5. Installation
© 2008 Siemens Airfield Solutions
All rights reserved
•
using materials or auxiliary equipment that are inappropriate or
incompatible with your ADB Airfield Solutions equipment
•
allowing unqualified personnel to perform any task
Read the installation section of all system component manuals before
installing your equipment. A thorough understanding of system
components and their requirements will help you install the system
safely and efficiently. See FAA Advisory Circular, AC 150/5340-30, for
Runway and Taxiway Edge Lighting Systems, and job site plans and
specifications for location and installation details.
WARNING: Failure to follow these safety procedures can
result in personal injury or death.
•
Allow only qualified personnel to install ADB Airfield Solutions
and auxiliary equipment. Use only approved equipment. Using
unapproved equipment in an approved system may void agency
approvals.
•
Make sure all equipment is rated and approved for the
environment in which you are using it.
•
Follow all instructions for installing components and accessories.
•
Install all electrical connections to local code.
•
Use only electrical wire of sufficient gauge and insulation to
handle the rated current demand. All wiring must meet local
codes.
•
Route electrical wiring along a protected path. Make sure they
will not be damaged by moving equipment.
•
Protect components from damage, wear, and harsh environment
conditions.
•
Allow ample room for maintenance, panel accessibility, and cover
removal.
•
Protect equipment with safety devices as specified by applicable
safety regulations.
•
If safety devices must be removed for installation, install them
immediately after the work is completed and check them for
proper functioning.
96A0388B
Issued 6/08
Safety
Page 1-3
Advertisement
Table of Contents
