Hart Mapping Parameters - Siemens SIMATIC ET 200SP HA Manual

Parameters

4.4 HART mapping parameters

4.4 HART mapping parameters
A maximum of 8 HART variables can be configured (mapped) to the address space of the I/O
module with the HART mapping parameters.
If you want to use a maximum of 8 HART variables in the input area of the I/O module, configure
these parameters in the properties dialog of the I/O module.
Parameters
Table 4-2
Parameter
Variable 0
:
:
Variable 7
See also
Parameter assignment and structure of the HART mapping parameters (Page 49)
20
HART mapping parameters of the I/O module
Value range
Chan‐ 0...15
nel
Type
● Non / CiR
● Primary
● Secondary
● Tertiary
● Quaternary
Chan‐ 0...15
nel
Type
● Non / CiR
● Primary
● Secondary
● Tertiary
● Quaternary
Analog Input Module AI 16xI 2-wire HART HA ( 6DL1134-6TH00-0PH1)
Default Parameter reassign‐
ment in RUN
0 Yes
Non / CiR Yes
0 Yes
Non / CiR Yes
Manual, 11/2017, A5E39408968-AB