Siemens SIMATIC ET 200SP HA Manual page 36

Technical specifications
Article number
● Address space per module with MultiHART,
Analog inputs
Number of analog inputs
permissible input current for current input (de‐
struction limit), max.
Input ranges (rated values), currents
● 0 to 20 mA
● Input resistance (0 to 20 mA)
● 4 mA to 20 mA
● Input resistance (4 mA to 20 mA)
Cable length
● shielded, max.
Analog value generation for the inputs
Measurement principle
Integration and conversion time/resolution per
channel
● Resolution with overrange (bit including
● Integration time, parameterizable
Smoothing of measured values
● parameterizable
Encoder
Connection of signal encoders
● for current measurement as 2-wire
Errors/accuracies
Linearity error (relative to input range), (+/-)
Temperature error (relative to input range), (+/-) 0.005 %/K
Crosstalk between the inputs, min.
Repeat accuracy in steady state at 25 °C (rela‐
tive to input range), (+/-)
Operational error limit in overall temperature range
● Current, relative to input range, (+/-)
Basic error limit (operational limit at 25 °C)
● Current, relative to input range, (+/-)
Interrupts/diagnostics/status information
Diagnostics function
Alarms
● Diagnostic alarm
● Limit value alarm
36
max.
sign), max.
transducer
6DL1134-6TH00-0PH1
41 byte; 32-byte inputs for HART and 2 bytes for
QI information, 6-byte inputs for HART, and 1-byte
output for MultiHART command
16
30 mA
Yes; 16 bit incl. sign
250 Ω
Yes; 16 bit incl. sign
250 Ω
800 m; Shielded
integrating (Sigma-Delta)
16 bit; 14 bit at 60 Hz (0 ... 10 mA), 16 bit at 10 Hz,
15 bit at 50 Hz and 15 bit at 60 Hz interference
suppression
Yes; channel by channel
Yes; none, weak, medium, strong, channel-by-
channel
Yes
0.01 %
60 dB
0.05 %
0.5 %
0.1 %
Yes
Yes
Yes; two upper and two lower limit values in each
case
Analog Input Module AI 16xI 2-wire HART HA ( 6DL1134-6TH00-0PH1)
Manual, 11/2017, A5E39408968-AB