Hart Mapping Parameters - Siemens SIMATIC ET 200SP Manual

Parameters

4.7 HART mapping parameters

4.7 HART mapping parameters
A maximum of 8 HART variables can be configured (mapped) to the address space of the I/O
module with the HART mapping parameters.
If you want to use a maximum of 8 HART variables in the input area of the I/O module, configure
these parameters in the properties dialog of the I/O module.
Parameters
Table 4-1
Parameter
Variable 0
:
:
Variable 7
30
HART mapping parameters of the I/O module
Value range
Chan‐ 0...15
nel
Type
● Non / CiR
● Primary
● Secondary
● Tertiary
● Quaternary
Chan‐ 0...15
nel
Type
● Non / CiR
● Primary
● Secondary
● Tertiary
● Quaternary
Input/output module AI-DI 16/DQ16x24VDC HART HA (6DL1133-6EW00-0PH1)
Default Parameter reassign‐
ment in RUN
0 Yes
Non / CiR Yes
0 Yes
Non / CiR Yes
Manual, 05/2017, A5E39294170-AA