Siemens SIMATIC ET 200SP HA Manual page 37

Article number
Diagnostic messages
● Monitoring the supply voltage
● Wire-break
● Short-circuit
● Overflow/underflow
Diagnostics indication LED
● MAINT LED
● Monitoring of the supply voltage (PWR-LED) Yes; green PWR LED
● Channel status display
● for channel diagnostics
● for module diagnostics
Potential separation
Potential separation channels
● between the channels
● between the channels and backplane bus
● Between the channels and load voltage L+
Isolation
Isolation tested with
Ambient conditions
Ambient temperature during operation
● horizontal installation, min.
● horizontal installation, max.
● vertical installation, min.
● vertical installation, max.
Dimensions
Width
Height
Depth
Weights
Weight, approx.
Analog Input Module AI 16xI 2-wire HART HA ( 6DL1134-6TH00-0PH1)
Manual, 11/2017, A5E39408968-AB
Technical specifications
6DL1134-6TH00-0PH1
Yes
Yes; channel by channel
Yes; Channel-by-channel, short-circuit of the en‐
coder supply to ground or of an input to the encod‐
er supply
Yes; channel by channel
Yes; yellow LED
Yes; Green LED
Yes; Red LED
Yes; green/red DIAG LED
No
Yes
No
1 500 V DC/1 min, type test
-40 °C
70 °C; Observe derating
-40 °C
60 °C; Observe derating
22.5 mm
115 mm
138 mm
148 g
37