Black Box Voice Pro FX700A Manual page 51

VOICE PRO
P 36: I
ROGRAM NSTALL
This program has been disabled, since all mailboxes that are not associated with a
valid extension number are set as greeting-only mailboxes. Greeting-only
mailboxes differ from normal mailboxes in that they do not allow a caller to leave a
voice-mail message. After the personal greeting of a mailbox of this type is played,
the caller is returned to the system's main greeting if there is nothing dialed by the
caller. The key element that makes the mailbox a "greeting-only mailbox" is the
password. The password for a greeting-only mailbox starts with a "*". The default
password for all greeting-only mailboxes is "**99". By changing the password to any
other number, as long as it does not start with an asterisk "*", will result in turning
the mailbox into a normal mailbox that can accept a voice-mail message. The
password for either type of mailbox must be 4 to 6 digits long, including the "*" if
it is to be a greeting-only mailbox.
Default: All mailboxes that do not have a valid extension number are assigned as
greeting-only mailboxes.
Example: The FX700A mailboxes that can receive messages are 10–15. The
FX701A mailboxes that can receive messages are 10–17. The FX702A mailboxes
that can receive messages are 10–21.
P 37: S
ROGRAM ELECT CALL
1. While in programming mode, and when prompted for the program number,
enter 37.
2. Press #.
3. Select one of the following call-forwarding methods:
• Enter 0 and press # to have calls forwarded on 2 lines with supervision. Busy
or unanswered calls are forwarded to a voice mailbox.
• Enter 1 and press # to enable one line to have 3-way calling feature. Note: You
must subscribe to this service with your local phone company for this feature
to operate properly. Also, you will have to press # every 120 seconds to extend
the conversation, or * to extend the call indefinitely and eliminate any further
prompts.
• Enter 2 and press # to enable one line with transfer (free up port at end of
dial). Note: You must subscribe to transfer and disconnect (Centrex) lines
with your local phone company for this feature to operate properly. Also, toll
charges remain in effect until the transferred call is disconnected.
50
M indicates that the program can be monitored using 50#.
See Program 50 for details.
" - "
GREETING ONLY MAILBOXES
-
FORWARDING METHOD FOR ALL LINES
M
M