System Startup - Black Box Voice Pro FX700A Manual

VOICE PRO

3.6 System Startup

Follow the steps listed in Figure 3-7 to start up the system.
Voice Pro Top Panel
Voice Logic
1. When power is supplied to the unit, all lights on the unit will
blink.
2. The PWR light (red) remains on.
3. The FULL light (yellow) will blink intermittently while the system
is in testing mode.
4. Once initialized, the FULL light will go out and Station 10 will
ring 6 times indicating the system is ready for use.
Do not operate the unit during startup.
System startup can take anywhere from 1 to 3 minutes.
If the unit fails during startup, press the Reset button (located on the
rear of the Voice Pro) to reboot the system.
If power is disconnected from the Voice Pro, the FULL light will flash
every 4 seconds until battery power is exhausted, or power is restored
to the unit.
26
Voice Pro
PWR In Use Full
Figure 3-7. Voice Pro top panel.
NOTES