Key System Or Pbx Connections; Connecting A Computer Or Fax Machine - Black Box Voice Pro FX700A Manual

VOICE PRO
3.3.2 K S
EY YSTEM OR
Voice Pro 2 x 6 Rear Panel
Voice Pro-206 Series Rear Panel
Ext15 Ext14
Insert the CO line jacks from the KSU
or PBX into the VP station ports.
Installation procedures for all models of the Voice Pro are the same. The
FX701A has 4 telephone company lines and 8 stations, and the FX702A
has 4 telephone company lines and 12 stations for additional telephones
and other equipment.
When connecting the stations to the Voice Pro system, make sure that
the second pair (black and yellow wires) on the RJ-11 jack is isolated.
DO NOT connect a telephone or any other device to this pair to avoid
damage to the system.
Do not connect multiple phones to the Voice Pro extension ports.
Use two different Voice Pro station ports for a 2-line phone. Use a 2-line
coupler to couple the two single-line cables to a single 2-line cable if
there is only one "L1+L2" port.
Station #10 is the operator station and cannot be changed. Callers who
dial 0 while in auto-attendant mode will automatically be transferred to
the operator station.

3.4 Connecting a Computer or Fax Machine

You can connect a computer (using a modem) or a fax machine to any one of the
station jacks. If you want to enable automatic fax switching, you must program the
station port for a fax machine.
Refer to the instructions and illustrations in the Quick Start Guide on pages 10
through 16 when connecting a computer or fax machine.
24
PBX C
ONNECTIONS
Ext13 Ext12 Ext11 Ext10
Figure 3-5. Key system or PBX connection.
Reset
Music RS232 Pwr
Line 2
Voice Pro
NOTES
Line 1
KSU or PBX
CO 1
CO 2
CO 3
CO 4
CO 3
CO 4