Black Box Voice Pro FX700A Manual page 36

P 3: A
ROGRAM SSIGN STATIONS TO TELEPHONE LINES
This program determines which extensions may access which telephone lines.
1. While in programming mode, and when prompted for the program number,
enter 3.
2. Press #.
3. When prompted for a line number, press 1 (for Line 1), and then press #.
4. When prompted for the corresponding extension number, enter extension
numbers in succession and then press #. For example, if extensions 10 and 11
are to be assigned to Line 1, press 1011#.
5. Repeat steps 3 and 4 for Lines 2 through 4. (Default: All incoming telephone
lines are accessible from all connected stations.)
P 4: S
ROGRAM ELECT RINGING ASSIGNMENT FOR STATIONS
This program determines the extensions and the incoming lines they will ring in
on. The system will override this program when the auto-attendant program (#30)
is set to 0 ring.
1. While in programming mode, and when prompted for the program number,
enter 4.
2. Press #.
3. When prompted for a line number, press 1 (for Line 1), and then press #.
4. When prompted for the corresponding extension number, enter extension
numbers in succession and then press #. For example, if Line 1 is to ring on
both extensions 10 and 11, press 1011#.
5. Repeat steps 3 and 4 for Lines 2 through 4.
Default: Line 1 rings on station 10, Line 2 on station 11, Line 3 on station 12, and
line 4 on station 13.
P 5: A
ROGRAM SSIGN STATION TO RING FOR DOOR OPERATION
1. While in programming mode, and when prompted for the program number,
enter 5.
M indicates that the program can be monitored using
Program 50 (50#). See Program 50 for details.
CHAPTER 4: Programming the Voice Pro System
M
M
M
35