Black Box Voice Pro FX700A Manual page 38

All incoming faxes will be automatically switched to the assigned
station. Refer to Program 31 for additional setup information.
P 8: S
ROGRAM ET TIMER FOR HOLD RECALL AND PARK ORBIT
This program sets a recall timer in seconds. Calls placed on hold or in a park orbit
will ring back to the station that initiated the hold when the timer expires.
1. While in programming mode, and when prompted for the program number,
enter 8.
2. Press #.
3. When prompted to set the timer, enter the number in seconds, and then
press #. For example, if you want the station to ring back in 30 seconds, enter
30#.
Default: 180 seconds.
P 9: A
ROGRAM SSIGN PRIME LINES TO STATIONS
A prime line is the line that you want the extension to dial out on first. If in use,
then it will dial out on the next available line. A busy tone indicates all lines are in
use.
1. While in programming mode, and when prompted for the program number,
enter 9.
2. Press #.
3. When prompted for the Line number, press 1 (for Line 1), and then press #.
4. Next assign the stations that will be automatically selected by the system. Enter
the station number(s) and then press #. For example, if Stations 10 and 11
are to use Line 1 for the outgoing line, press 1011#.
Default: Station 10 on Line 1, Station 11 on Line 2, Station 12 on Line 3, and
Station 13 on Line 4.
M indicates that the program can be monitored using
Program 50 (50#). See Program 50 for details.
CHAPTER 4: Programming the Voice Pro System
NOTE
M
M
37