Table of Contents
Advertisement
3.7 Installing an External Music Source
Follow the steps listed in Figure 3-8 to install an external music source.
Voice Pro 2 x 6 Rear Panel
Voice Pro-206 Series Rear Panel
Ext15
Voice Pro
1. Plug the 3.5 mm. mono phono plug
into the Music jack on the rear panel.
2. Plug the music source into an outlet,
other than the outlet dedicated to the VP
unit.
Figure 3-8. Installing an external music source.
Output requirement of the music source is no more than 0.7 V, which is
the standard output for headphone jacks.
3.8 Battery Backup
Included with each unit is a 6-VDC battery (located inside the Voice Pro). The
battery provides 6 to 10 hours of backup for memory, system programming, and
messages if the AC power fails. The Voice Pro cannot answer calls when powered
by the battery.
To maintain system integrity, install an uninterruptible power source (UPS).
Ext14
Ext13
Ext12
Ext11
Reset
Music
RS232
Pwr
Ext10
Line 2
911224
NOTE
CHAPTER 3: Installation
Line 1
27
Advertisement
Table of Contents
