Table of Contents
Advertisement
3.1 Overview
You can begin using your Voice Pro system in just minutes by following these four
easy steps.
1. Connect the telephone company lines to the Voice Pro's rear panel.
2. Connect your telephones and other equipment to the extension ports.
3. Install the power supply to the Voice Pro.
4. Install an external music source (optional).
Installation procedures for all Voice Pro models are the same. The
FX701A has two additional station ports, and the FX702A has six
additional station ports for added telephones or other equipment. The
FX701A and FX702A both have two additional telephone line jacks as
well.
Depending upon the unit you purchased, you can have anywhere from 1 to 4
incoming lines. The available Voice Pro systems are described in Table 3-1.
System
Model
FX700A
FX701A
FX702A
3. Installation
Table 3-1. Available Voice Pro systems
Telephone
Co./Station
Lines
2 x 6
4 x 8
4 x 12
NOTE
Message
Length
Options
(hours)
2, 4, 8
2, 4, 8
2, 4, 8
CHAPTER 3: Installation
Valid
Station
Number
10–15
10–17
10–21
Number of
Mailboxes
85
85
85
21
Advertisement
Table of Contents
