Touch-Tone Telephone; Voice Pro System Program Guide - Black Box Voice Pro FX700A Manual

You may exit programming mode at any time by dialing * *. When you
hear "Good-bye," you have exited programming mode.
M indicates that the program can be monitored using Program 50 (50#).
See Program 50 for details.
4.3 Program the Voice Pro from a Remote Touch-Tone Telephone
1. Enable auto-attendant. (The Voice Pro defaults to auto-attendant upon
power-up.)
2. Call in to the Voice Pro on any telephone line.
3. When auto-attendant answers, press #.
4. Follow the voice prompts to program your system.

4.4 Voice Pro System Program Guide

Voice Pro comes with a host of advanced features that you can program easily. The
following programs are set up while in program mode and can be done from a
connected station or remotely with a touch-tone telephone. Pick and choose from
the programs listed in this section to customize your system for your own special
needs.
You can add or change your program settings any time you like.
If you exited programming mode in the previous section, you must return to
program mode; otherwise, proceed to select from the programs outlined in this
section.
While in programming mode, if you do not make an entry within one
minute after the prompt, the system will hang up. Valid entries made
before that point are retained in the system.
A
CCESS PROGRAM MODE FROM A CONNECTED STATION
1. Pick up the corded handset.
2. Press #.
3. When prompted for the password, enter the default password 1 2 3 4 and
press #.
CHAPTER 4: Programming the Voice Pro System
NOTES
NOTE
NOTE
33