Black Box Voice Pro FX700A Manual page 40

4. Enter the minute (valid entries are 00–59), and then press #.
5. Press 1 for AM or 2 for PM, and then press #.
6. Enter the hour night mode is to end (valid entries are 1–12), and then press
#.
7. Enter the minute (valid entries are 00–59), and then press #.
8. Press 1 for AM or 2 for PM, and then press #.
Default: Starts 3:01 AM; Stops 3:02 AM and contains Greeting 1.
Example: If you want to start night mode at 1:10 AM and stop at 6:00 PM, enter
1#10#1#6#0#2#.
Night mode cannot be disabled. Instead, set night mode to start and end
when there is minimal telephone traffic.
P 13: M
ROGRAM USIC ON HOLD
Default: Permanently enabled. This entry is invalid.
P 14: S
ROGRAM ET TIME
This program allows you to set the number of rings a station will ring before it is
automatically transferred to a voice mailbox.
1. While in programming mode, and when prompted for the program number,
enter 14.
2. Press #.
3. When prompted to set the number of rings before a call is diverted to a voice
mailbox when not answered, enter the number, and then press #.
(Default: 6 rings.)
P 15: A
ROGRAM SSIGN GREETINGS TO TELEPHONE COMPANY LINES
Use this program if you want to have a separate greeting for an incoming line. (For
example, two different companies using the same Voice Pro.)
1. While in programming mode, and when prompted for the program number,
enter 15.
2. Press #.
M indicates that the program can be monitored using
Program 50 (50#). See Program 50 for details.
CHAPTER 4: Programming the Voice Pro System
IMPORTANT
- "
OUT FOR RING NO ANSWER
" M
M
39