1. While in programming mode, and when prompted for the program number,
enter 17.
2. Press #.
3. When prompted enter the station number to be screened. Press #.
4. Enter the outside number to forward calls to, and then press #.
Default: No remote screening.
You can enable or disable this feature without entering system
programming.
P
18: P
ROGRAM
ROGRAM PHONE TO SCREEN CALLS LOCALLY
You can use this program to ring your station and have an incoming call
announced. See Section 5.10.
1. While in programming mode, and when prompted for the program number,
enter 18.
2. Press #.
3. When prompted, enter the station number to be screened. Press #.
Default: No local screening.
You can enable or disable this feature without entering system
programming.
P
19: S
ROGRAM
ET THE CLOCK
1. Remain in programming mode, and when prompted for the program
number, enter 19.
2. Press #.
3. Enter the hour (valid entries are 1–12) and press #.
4. Enter minutes (valid entries are 00–59) and press #.
5. Press 1 for AM or 2 for PM and press #.
Default: 12:00 PM
M
indicates that the program can be monitored using 50#.
See Program 50 for details.
CHAPTER 4: Programming the Voice Pro System
NOTE
NOTE
M
41